[2026-10-30T11:16:40.437Z] [info] SUT version: v1.0.0 [2026-10-30T11:16:40.437Z] [info] Connecting to USB Configuration Link [2026-10-30T11:16:40.439Z] [info] Successfully established connection with the USB Configuration Link (USB device /dev/ttyUSB0) [2026-10-30T11:16:40.439Z] [info] Connected to USB Configuration Link [2026-10-30T11:16:40.439Z] [info] Starting wearable start-up sequence [2026-10-30T11:16:40.950Z] [info] Wearable Unique Device ID: 0447323532363232004A0036 [2026-10-30T11:16:40.959Z] [info] Wearable start-up checks were completed in less than 10 seconds [2026-10-30T11:16:40.959Z] [info] STARTUP_CHECKS_DONE_CP_STATE = completed [2026-10-30T11:16:40.959Z] [info] STARTUP_CHECKS_TIMEOUT_CP_STATE = allocated time not reached [2026-10-30T11:16:40.959Z] [info] BANK1_INVALID_CP_STATE = valid [2026-10-30T11:16:40.959Z] [info] BANK2_INVALID_CP_STATE = valid [2026-10-30T11:16:40.959Z] [info] RUN_BANK_CP_STATE = Bank 1 [2026-10-30T11:16:40.959Z] [info] FW_NOT_COMP_STATE = compatible [2026-10-30T11:16:40.959Z] [info] WPT_INVALID_CP_STATE = in allowed range [2026-10-30T11:16:40.959Z] [info] RFON_INVALID_CP_STATE = valid [2026-10-30T11:16:40.959Z] [info] ENABLE_RFON_INVALID_CP_STATE = valid [2026-10-30T11:16:40.970Z] [info] Current Firmware Version and Hardware Identifiers: [2026-10-30T11:16:40.970Z] [info] Bank number = 0 [2026-10-30T11:16:40.970Z] [info] FW Version = 1.1.0 [2026-10-30T11:16:40.970Z] [info] FW Product Identifier = 5344 [2026-10-30T11:16:40.970Z] [info] FW Subsystem Identifier = 4350 [2026-10-30T11:16:40.970Z] [info] FW Compatibility version = 01 [2026-10-30T11:16:40.970Z] [info] MCU Product Identifier = 5344 [2026-10-30T11:16:40.970Z] [info] MCU Subsystem Identifier = 4350 [2026-10-30T11:16:40.970Z] [info] MCU HW version = 01 [2026-10-30T11:16:40.987Z] [info] Wearable firmware build identity: 1.1.0-dev+b1510.g5ba050d (bank 0, 17988 bytes, CRC32 0x8A006F45) [2026-10-30T11:16:40.987Z] [info] Wearable start-up sequence completed [2026-10-30T11:16:40.987Z] [info] Starting implant start-up sequence [2026-10-30T11:16:40.994Z] [info] Implant powered-on [2026-10-30T11:16:43.548Z] [info] Implant start-up checks were completed in less than 10 seconds [2026-10-30T11:16:43.548Z] [info] IMP_FW_STATE_STARTUP_CHECKS_DONE = completed [2026-10-30T11:16:43.548Z] [info] IMP_FW_STATE_BANK1_INVALID = valid [2026-10-30T11:16:43.548Z] [info] IMP_FW_STATE_BANK2_INVALID = valid [2026-10-30T11:16:43.548Z] [info] IMP_FW_STATE_RUNNING_BANK = Bank 1 [2026-10-30T11:16:43.548Z] [info] IMP_FW_STATE_BANKS_DIFF = identical [2026-10-30T11:16:43.548Z] [info] IMP_FW_STATE_NOT_COMP_WITH_HW = compatible [2026-10-30T11:16:43.548Z] [info] IMP_FPGA_STATE_STARTUP_CHECKS_DONE = completed [2026-10-30T11:16:43.548Z] [info] IMP_FPGA_STATE_BITSTREAM_INVALID = valid [2026-10-30T11:16:43.548Z] [info] IMP_SENSORS_STATE_STARTUP_CHECKS_DONE = completed [2026-10-30T11:16:43.548Z] [info] IMP_SENSORS_STATE_IMPLAUSIBLE_TEMPERATURE = implausible [2026-10-30T11:16:43.621Z] [info] Implant Unique HW ID: 04473235323632320045002E [2026-10-30T11:16:43.689Z] [info] Implant HW Revision ID FW: 5344494D02. Implant HW Revision ID FACTORY: 5344494D02 [2026-10-30T11:16:43.689Z] [error] Implant start-up sequence failed because at least one of the MCUs Firmware states is invalid [2026-10-30T11:16:43.999Z] [info] Implant firmware build identity: 1.1.0-dev.ablapp-1502-keepalive-7s+b1413.gb44b676 (bank 0, 21572 bytes, CRC32 0x08E3E045) [2026-10-30T11:16:44.100Z] [info] Implant FPGA bitstream: 135180 bytes, CRC32 0xA50ED517 [2026-10-30T11:16:44.100Z] [info] Implant start-up sequence completed [2026-10-30T11:16:44.100Z] [info] Starting implant update sequence [2026-10-30T11:16:44.154Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-10-30T11:16:44.154Z] [info] Target firmware CRC: 0x5E434D73 [2026-10-30T11:16:44.215Z] [info] Bank 1 has target firmware: no [2026-10-30T11:16:44.215Z] [info] Starting update of inactive bank 1 [2026-10-30T11:16:44.215Z] [info] Update progress: 0% [2026-10-30T11:16:47.311Z] [info] Update progress: 10% [2026-10-30T11:16:50.262Z] [info] Update progress: 20% [2026-10-30T11:16:53.215Z] [info] Update progress: 30% [2026-10-30T11:16:56.167Z] [info] Update progress: 40% [2026-10-30T11:16:59.121Z] [info] Update progress: 50% [2026-10-30T11:17:02.069Z] [info] Update progress: 60% [2026-10-30T11:17:05.016Z] [info] Update progress: 70% [2026-10-30T11:17:07.965Z] [info] Update progress: 80% [2026-10-30T11:17:10.918Z] [info] Update progress: 90% [2026-10-30T11:17:13.697Z] [info] Update progress: 100% [2026-10-30T11:17:13.808Z] [info] Bank 1 successfully updated [2026-10-30T11:17:13.808Z] [info] Rebooting to switch to bank 1 [2026-10-30T11:17:19.361Z] [info] Current firmware: v1.1.0, active bank: 1 [2026-10-30T11:17:19.616Z] [info] Bank 1 firmware build identity: 1.1.0-dev.test-only-no-mcu-low-power+b1436.gf7e8df3 (bank 1, 21576 bytes, CRC32 0x5E434D73) [2026-10-30T11:17:19.679Z] [info] Bank 0 has target firmware: no [2026-10-30T11:17:19.679Z] [info] Starting update of inactive bank 0 [2026-10-30T11:17:19.679Z] [info] Update progress: 0% [2026-10-30T11:17:22.762Z] [info] Update progress: 10% [2026-10-30T11:17:25.709Z] [info] Update progress: 20% [2026-10-30T11:17:28.661Z] [info] Update progress: 30% [2026-10-30T11:17:31.618Z] [info] Update progress: 40% [2026-10-30T11:17:34.578Z] [info] Update progress: 50% [2026-10-30T11:17:37.528Z] [info] Update progress: 60% [2026-10-30T11:17:40.475Z] [info] Update progress: 70% [2026-10-30T11:17:43.428Z] [info] Update progress: 80% [2026-10-30T11:17:46.383Z] [info] Update progress: 90% [2026-10-30T11:17:49.162Z] [info] Update progress: 100% [2026-10-30T11:17:49.273Z] [info] Bank 0 successfully updated [2026-10-30T11:17:49.273Z] [info] Rebooting to switch to bank 0 [2026-10-30T11:17:54.824Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-10-30T11:17:55.075Z] [info] Bank 0 firmware build identity: 1.1.0-dev.test-only-no-mcu-low-power+b1436.gf7e8df3 (bank 0, 21576 bytes, CRC32 0x5E434D73) [2026-10-30T11:17:55.075Z] [info] Both banks are up-to-date [2026-10-30T11:17:55.075Z] [info] Implant update sequence completed [2026-10-30T11:17:55.075Z] [info] SUT completed successfully