[2026-11-01T16:27:44.491Z] [info] SUT version: v1.0.0 [2026-11-01T16:27:44.491Z] [info] Connecting to USB Configuration Link [2026-11-01T16:27:44.493Z] [info] Successfully established connection with the USB Configuration Link (USB device /dev/ttyUSB0) [2026-11-01T16:27:44.493Z] [info] Connected to USB Configuration Link [2026-11-01T16:27:44.493Z] [info] Starting wearable start-up sequence [2026-11-01T16:27:45.004Z] [info] Wearable Unique Device ID: 0447323532363232004A0036 [2026-11-01T16:27:45.013Z] [info] Wearable start-up checks were completed in less than 10 seconds [2026-11-01T16:27:45.013Z] [info] STARTUP_CHECKS_DONE_CP_STATE = completed [2026-11-01T16:27:45.013Z] [info] STARTUP_CHECKS_TIMEOUT_CP_STATE = allocated time not reached [2026-11-01T16:27:45.013Z] [info] BANK1_INVALID_CP_STATE = valid [2026-11-01T16:27:45.013Z] [info] BANK2_INVALID_CP_STATE = valid [2026-11-01T16:27:45.013Z] [info] RUN_BANK_CP_STATE = Bank 1 [2026-11-01T16:27:45.013Z] [info] FW_NOT_COMP_STATE = compatible [2026-11-01T16:27:45.013Z] [info] WPT_INVALID_CP_STATE = in allowed range [2026-11-01T16:27:45.013Z] [info] RFON_INVALID_CP_STATE = valid [2026-11-01T16:27:45.013Z] [info] ENABLE_RFON_INVALID_CP_STATE = valid [2026-11-01T16:27:45.024Z] [info] Current Firmware Version and Hardware Identifiers: [2026-11-01T16:27:45.024Z] [info] Bank number = 0 [2026-11-01T16:27:45.024Z] [info] FW Version = 1.1.0 [2026-11-01T16:27:45.024Z] [info] FW Product Identifier = 5344 [2026-11-01T16:27:45.024Z] [info] FW Subsystem Identifier = 4350 [2026-11-01T16:27:45.024Z] [info] FW Compatibility version = 01 [2026-11-01T16:27:45.024Z] [info] MCU Product Identifier = 5344 [2026-11-01T16:27:45.024Z] [info] MCU Subsystem Identifier = 4350 [2026-11-01T16:27:45.024Z] [info] MCU HW version = 01 [2026-11-01T16:27:45.041Z] [info] Wearable firmware build identity: 1.1.0-dev+b1510.g5ba050d (bank 0, 17988 bytes, CRC32 0x8A006F45) [2026-11-01T16:27:45.041Z] [info] Wearable start-up sequence completed [2026-11-01T16:27:45.041Z] [info] Starting implant start-up sequence [2026-11-01T16:27:45.048Z] [info] Implant powered-on [2026-11-01T16:27:47.602Z] [info] Implant start-up checks were completed in less than 10 seconds [2026-11-01T16:27:47.602Z] [info] IMP_FW_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T16:27:47.602Z] [info] IMP_FW_STATE_BANK1_INVALID = valid [2026-11-01T16:27:47.602Z] [info] IMP_FW_STATE_BANK2_INVALID = valid [2026-11-01T16:27:47.602Z] [info] IMP_FW_STATE_RUNNING_BANK = Bank 1 [2026-11-01T16:27:47.602Z] [info] IMP_FW_STATE_BANKS_DIFF = identical [2026-11-01T16:27:47.602Z] [info] IMP_FW_STATE_NOT_COMP_WITH_HW = compatible [2026-11-01T16:27:47.602Z] [info] IMP_FPGA_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T16:27:47.602Z] [info] IMP_FPGA_STATE_BITSTREAM_INVALID = valid [2026-11-01T16:27:47.602Z] [info] IMP_SENSORS_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T16:27:47.602Z] [info] IMP_SENSORS_STATE_IMPLAUSIBLE_TEMPERATURE = implausible [2026-11-01T16:27:47.675Z] [info] Implant Unique HW ID: 0747373435333434002E0036 [2026-11-01T16:27:47.745Z] [info] Implant HW Revision ID FW: 5344494D02. Implant HW Revision ID FACTORY: 5344494D02 [2026-11-01T16:27:47.745Z] [error] Implant start-up sequence failed because at least one of the MCUs Firmware states is invalid [2026-11-01T16:27:48.056Z] [info] Implant firmware build identity: 1.1.0-dev.ablapp-1502-keepalive-7s+b1413.gb44b676 (bank 0, 21572 bytes, CRC32 0x08E3E045) [2026-11-01T16:27:48.155Z] [info] Implant FPGA bitstream: 135180 bytes, CRC32 0xA50ED517 [2026-11-01T16:27:48.155Z] [info] Implant start-up sequence completed [2026-11-01T16:27:48.155Z] [info] Starting implant update sequence [2026-11-01T16:27:48.208Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-11-01T16:27:48.208Z] [info] Target firmware CRC: 0xC74A0F71 [2026-11-01T16:27:48.269Z] [info] Bank 1 has target firmware: no [2026-11-01T16:27:48.269Z] [info] Starting update of inactive bank 1 [2026-11-01T16:27:48.269Z] [info] Update progress: 0% [2026-11-01T16:27:51.549Z] [info] Update progress: 10% [2026-11-01T16:27:54.502Z] [info] Update progress: 20% [2026-11-01T16:27:57.459Z] [info] Update progress: 30% [2026-11-01T16:28:00.594Z] [info] Update progress: 40% [2026-11-01T16:28:03.550Z] [info] Update progress: 50% [2026-11-01T16:28:06.495Z] [info] Update progress: 60% [2026-11-01T16:28:09.617Z] [info] Update progress: 70% [2026-11-01T16:28:12.560Z] [info] Update progress: 80% [2026-11-01T16:28:15.513Z] [info] Update progress: 90% [2026-11-01T16:28:18.470Z] [info] Update progress: 100% [2026-11-01T16:28:18.611Z] [info] Bank 1 successfully updated [2026-11-01T16:28:18.611Z] [info] Rebooting to switch to bank 1 [2026-11-01T16:28:24.166Z] [info] Current firmware: v1.1.0, active bank: 1 [2026-11-01T16:28:24.398Z] [info] Bank 1 firmware build identity: 1.1.0-dev.test-only-slow-cpu-no-1ms-tick+b1446.g2408db2 (bank 1, 22068 bytes, CRC32 0xC74A0F71) [2026-11-01T16:28:24.458Z] [info] Bank 0 has target firmware: no [2026-11-01T16:28:24.459Z] [info] Starting update of inactive bank 0 [2026-11-01T16:28:24.459Z] [info] Update progress: 0% [2026-11-01T16:28:28.043Z] [info] Update progress: 10% [2026-11-01T16:28:31.506Z] [info] Update progress: 20% [2026-11-01T16:28:34.968Z] [info] Update progress: 30% [2026-11-01T16:28:38.639Z] [info] Update progress: 40% [2026-11-01T16:28:42.106Z] [info] Update progress: 50% [2026-11-01T16:28:45.576Z] [info] Update progress: 60% [2026-11-01T16:28:49.244Z] [info] Update progress: 70% [2026-11-01T16:28:52.705Z] [info] Update progress: 80% [2026-11-01T16:28:56.168Z] [info] Update progress: 90% [2026-11-01T16:28:59.635Z] [info] Update progress: 100% [2026-11-01T16:28:59.747Z] [info] Bank 0 successfully updated [2026-11-01T16:28:59.747Z] [info] Rebooting to switch to bank 0 [2026-11-01T16:29:05.300Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-11-01T16:29:05.537Z] [info] Bank 0 firmware build identity: 1.1.0-dev.test-only-slow-cpu-no-1ms-tick+b1446.g2408db2 (bank 0, 22068 bytes, CRC32 0xC74A0F71) [2026-11-01T16:29:05.537Z] [info] Both banks are up-to-date [2026-11-01T16:29:05.537Z] [info] Implant update sequence completed [2026-11-01T16:29:05.537Z] [info] SUT completed successfully