[2026-11-01T17:07:23.580Z] [info] SUT version: v1.0.0 [2026-11-01T17:07:23.580Z] [info] Connecting to USB Configuration Link [2026-11-01T17:07:23.581Z] [info] Successfully established connection with the USB Configuration Link (USB device /dev/ttyUSB0) [2026-11-01T17:07:23.581Z] [info] Connected to USB Configuration Link [2026-11-01T17:07:23.581Z] [info] Starting wearable start-up sequence [2026-11-01T17:07:24.093Z] [info] Wearable Unique Device ID: 0447323532363232004A0036 [2026-11-01T17:07:24.102Z] [info] Wearable start-up checks were completed in less than 10 seconds [2026-11-01T17:07:24.102Z] [info] STARTUP_CHECKS_DONE_CP_STATE = completed [2026-11-01T17:07:24.102Z] [info] STARTUP_CHECKS_TIMEOUT_CP_STATE = allocated time not reached [2026-11-01T17:07:24.102Z] [info] BANK1_INVALID_CP_STATE = valid [2026-11-01T17:07:24.102Z] [info] BANK2_INVALID_CP_STATE = valid [2026-11-01T17:07:24.102Z] [info] RUN_BANK_CP_STATE = Bank 1 [2026-11-01T17:07:24.102Z] [info] FW_NOT_COMP_STATE = compatible [2026-11-01T17:07:24.102Z] [info] WPT_INVALID_CP_STATE = in allowed range [2026-11-01T17:07:24.102Z] [info] RFON_INVALID_CP_STATE = valid [2026-11-01T17:07:24.102Z] [info] ENABLE_RFON_INVALID_CP_STATE = valid [2026-11-01T17:07:24.112Z] [info] Current Firmware Version and Hardware Identifiers: [2026-11-01T17:07:24.112Z] [info] Bank number = 0 [2026-11-01T17:07:24.112Z] [info] FW Version = 1.1.0 [2026-11-01T17:07:24.113Z] [info] FW Product Identifier = 5344 [2026-11-01T17:07:24.113Z] [info] FW Subsystem Identifier = 4350 [2026-11-01T17:07:24.113Z] [info] FW Compatibility version = 01 [2026-11-01T17:07:24.113Z] [info] MCU Product Identifier = 5344 [2026-11-01T17:07:24.113Z] [info] MCU Subsystem Identifier = 4350 [2026-11-01T17:07:24.113Z] [info] MCU HW version = 01 [2026-11-01T17:07:24.129Z] [info] Wearable firmware build identity: 1.1.0-dev+b1510.g5ba050d (bank 0, 17988 bytes, CRC32 0x8A006F45) [2026-11-01T17:07:24.129Z] [info] Wearable start-up sequence completed [2026-11-01T17:07:24.129Z] [info] Starting implant start-up sequence [2026-11-01T17:07:24.137Z] [info] Implant powered-on [2026-11-01T17:07:26.690Z] [info] Implant start-up checks were completed in less than 10 seconds [2026-11-01T17:07:26.690Z] [info] IMP_FW_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T17:07:26.690Z] [info] IMP_FW_STATE_BANK1_INVALID = valid [2026-11-01T17:07:26.690Z] [info] IMP_FW_STATE_BANK2_INVALID = valid [2026-11-01T17:07:26.690Z] [info] IMP_FW_STATE_RUNNING_BANK = Bank 1 [2026-11-01T17:07:26.691Z] [info] IMP_FW_STATE_BANKS_DIFF = identical [2026-11-01T17:07:26.691Z] [info] IMP_FW_STATE_NOT_COMP_WITH_HW = compatible [2026-11-01T17:07:26.691Z] [info] IMP_FPGA_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T17:07:26.691Z] [info] IMP_FPGA_STATE_BITSTREAM_INVALID = valid [2026-11-01T17:07:26.691Z] [info] IMP_SENSORS_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T17:07:26.691Z] [info] IMP_SENSORS_STATE_IMPLAUSIBLE_TEMPERATURE = implausible [2026-11-01T17:07:26.763Z] [info] Implant Unique HW ID: 0747373435333434002E0036 [2026-11-01T17:07:26.833Z] [info] Implant HW Revision ID FW: 5344494D02. Implant HW Revision ID FACTORY: 5344494D02 [2026-11-01T17:07:26.833Z] [error] Implant start-up sequence failed because at least one of the MCUs Firmware states is invalid [2026-11-01T17:07:27.149Z] [info] Implant firmware build identity: 1.1.0-dev.test-only-no-mcu-low-power+b1436.gf7e8df3 (bank 0, 21576 bytes, CRC32 0x5E434D73) [2026-11-01T17:07:27.247Z] [info] Implant FPGA bitstream: 135180 bytes, CRC32 0xA50ED517 [2026-11-01T17:07:27.247Z] [info] Implant start-up sequence completed [2026-11-01T17:07:27.247Z] [info] Starting implant update sequence [2026-11-01T17:07:27.300Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-11-01T17:07:27.300Z] [info] Target firmware CRC: 0x08E3E045 [2026-11-01T17:07:27.362Z] [info] Bank 1 has target firmware: no [2026-11-01T17:07:27.362Z] [info] Starting update of inactive bank 1 [2026-11-01T17:07:27.362Z] [info] Update progress: 0% [2026-11-01T17:07:30.467Z] [info] Update progress: 10% [2026-11-01T17:07:33.420Z] [info] Update progress: 20% [2026-11-01T17:07:36.371Z] [info] Update progress: 30% [2026-11-01T17:07:39.336Z] [info] Update progress: 40% [2026-11-01T17:07:42.292Z] [info] Update progress: 50% [2026-11-01T17:07:45.237Z] [info] Update progress: 60% [2026-11-01T17:07:48.191Z] [info] Update progress: 70% [2026-11-01T17:07:51.142Z] [info] Update progress: 80% [2026-11-01T17:07:54.094Z] [info] Update progress: 90% [2026-11-01T17:07:56.878Z] [info] Update progress: 100% [2026-11-01T17:07:56.989Z] [info] Bank 1 successfully updated [2026-11-01T17:07:56.989Z] [info] Rebooting to switch to bank 1 [2026-11-01T17:08:02.542Z] [info] Current firmware: v1.1.0, active bank: 1 [2026-11-01T17:08:02.757Z] [info] Bank 1 firmware build identity: 1.1.0-dev.ablapp-1502-keepalive-7s+b1413.gb44b676 (bank 1, 21572 bytes, CRC32 0x08E3E045) [2026-11-01T17:08:02.822Z] [info] Bank 0 has target firmware: no [2026-11-01T17:08:02.822Z] [info] Starting update of inactive bank 0 [2026-11-01T17:08:02.822Z] [info] Update progress: 0% [2026-11-01T17:08:06.196Z] [info] Update progress: 10% [2026-11-01T17:08:09.665Z] [info] Update progress: 20% [2026-11-01T17:08:13.127Z] [info] Update progress: 30% [2026-11-01T17:08:16.591Z] [info] Update progress: 40% [2026-11-01T17:08:20.056Z] [info] Update progress: 50% [2026-11-01T17:08:23.530Z] [info] Update progress: 60% [2026-11-01T17:08:26.997Z] [info] Update progress: 70% [2026-11-01T17:08:30.458Z] [info] Update progress: 80% [2026-11-01T17:08:33.924Z] [info] Update progress: 90% [2026-11-01T17:08:37.192Z] [info] Update progress: 100% [2026-11-01T17:08:37.303Z] [info] Bank 0 successfully updated [2026-11-01T17:08:37.303Z] [info] Rebooting to switch to bank 0 [2026-11-01T17:08:42.856Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-11-01T17:08:43.070Z] [info] Bank 0 firmware build identity: 1.1.0-dev.ablapp-1502-keepalive-7s+b1413.gb44b676 (bank 0, 21572 bytes, CRC32 0x08E3E045) [2026-11-01T17:08:43.070Z] [info] Both banks are up-to-date [2026-11-01T17:08:43.070Z] [info] Implant update sequence completed [2026-11-01T17:08:43.070Z] [info] SUT completed successfully