[2026-11-01T18:29:38.803Z] [info] SUT version: v1.0.0 [2026-11-01T18:29:38.803Z] [info] Connecting to USB Configuration Link [2026-11-01T18:29:38.804Z] [info] Successfully established connection with the USB Configuration Link (USB device /dev/ttyUSB0) [2026-11-01T18:29:38.804Z] [info] Connected to USB Configuration Link [2026-11-01T18:29:38.804Z] [info] Starting wearable start-up sequence [2026-11-01T18:29:39.316Z] [info] Wearable Unique Device ID: 0447323532363232004A0036 [2026-11-01T18:29:39.325Z] [info] Wearable start-up checks were completed in less than 10 seconds [2026-11-01T18:29:39.325Z] [info] STARTUP_CHECKS_DONE_CP_STATE = completed [2026-11-01T18:29:39.325Z] [info] STARTUP_CHECKS_TIMEOUT_CP_STATE = allocated time not reached [2026-11-01T18:29:39.325Z] [info] BANK1_INVALID_CP_STATE = valid [2026-11-01T18:29:39.325Z] [info] BANK2_INVALID_CP_STATE = valid [2026-11-01T18:29:39.325Z] [info] RUN_BANK_CP_STATE = Bank 1 [2026-11-01T18:29:39.325Z] [info] FW_NOT_COMP_STATE = compatible [2026-11-01T18:29:39.325Z] [info] WPT_INVALID_CP_STATE = in allowed range [2026-11-01T18:29:39.325Z] [info] RFON_INVALID_CP_STATE = valid [2026-11-01T18:29:39.325Z] [info] ENABLE_RFON_INVALID_CP_STATE = valid [2026-11-01T18:29:39.336Z] [info] Current Firmware Version and Hardware Identifiers: [2026-11-01T18:29:39.336Z] [info] Bank number = 0 [2026-11-01T18:29:39.336Z] [info] FW Version = 1.1.0 [2026-11-01T18:29:39.336Z] [info] FW Product Identifier = 5344 [2026-11-01T18:29:39.336Z] [info] FW Subsystem Identifier = 4350 [2026-11-01T18:29:39.336Z] [info] FW Compatibility version = 01 [2026-11-01T18:29:39.336Z] [info] MCU Product Identifier = 5344 [2026-11-01T18:29:39.336Z] [info] MCU Subsystem Identifier = 4350 [2026-11-01T18:29:39.336Z] [info] MCU HW version = 01 [2026-11-01T18:29:39.353Z] [info] Wearable firmware build identity: 1.1.0-dev+b1510.g5ba050d (bank 0, 17988 bytes, CRC32 0x8A006F45) [2026-11-01T18:29:39.353Z] [info] Wearable start-up sequence completed [2026-11-01T18:29:39.353Z] [info] Starting implant start-up sequence [2026-11-01T18:29:39.360Z] [info] Implant powered-on [2026-11-01T18:29:41.914Z] [info] Implant start-up checks were completed in less than 10 seconds [2026-11-01T18:29:41.914Z] [info] IMP_FW_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T18:29:41.914Z] [info] IMP_FW_STATE_BANK1_INVALID = valid [2026-11-01T18:29:41.914Z] [info] IMP_FW_STATE_BANK2_INVALID = valid [2026-11-01T18:29:41.914Z] [info] IMP_FW_STATE_RUNNING_BANK = Bank 1 [2026-11-01T18:29:41.914Z] [info] IMP_FW_STATE_BANKS_DIFF = identical [2026-11-01T18:29:41.914Z] [info] IMP_FW_STATE_NOT_COMP_WITH_HW = compatible [2026-11-01T18:29:41.914Z] [info] IMP_FPGA_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T18:29:41.914Z] [info] IMP_FPGA_STATE_BITSTREAM_INVALID = valid [2026-11-01T18:29:41.914Z] [info] IMP_SENSORS_STATE_STARTUP_CHECKS_DONE = completed [2026-11-01T18:29:41.914Z] [info] IMP_SENSORS_STATE_IMPLAUSIBLE_TEMPERATURE = implausible [2026-11-01T18:29:41.986Z] [info] Implant Unique HW ID: 0747373435333434002E0036 [2026-11-01T18:29:42.055Z] [info] Implant HW Revision ID FW: 5344494D02. Implant HW Revision ID FACTORY: 5344494D02 [2026-11-01T18:29:42.055Z] [error] Implant start-up sequence failed because at least one of the MCUs Firmware states is invalid [2026-11-01T18:29:42.387Z] [info] Implant firmware build identity: 1.1.0-dev.test-only-slow-cpu-no-1ms-tick+b1446.g2408db2 (bank 0, 22068 bytes, CRC32 0xC74A0F71) [2026-11-01T18:29:42.494Z] [info] Implant FPGA bitstream: 135180 bytes, CRC32 0xA50ED517 [2026-11-01T18:29:42.494Z] [info] Implant start-up sequence completed [2026-11-01T18:29:42.494Z] [info] Starting implant update sequence [2026-11-01T18:29:42.543Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-11-01T18:29:42.543Z] [info] Target firmware CRC: 0x93229D1D [2026-11-01T18:29:42.605Z] [info] Bank 1 has target firmware: no [2026-11-01T18:29:42.605Z] [info] Starting update of inactive bank 1 [2026-11-01T18:29:42.605Z] [info] Update progress: 0% [2026-11-01T18:29:45.706Z] [info] Update progress: 10% [2026-11-01T18:29:48.664Z] [info] Update progress: 20% [2026-11-01T18:29:51.633Z] [info] Update progress: 30% [2026-11-01T18:29:54.591Z] [info] Update progress: 40% [2026-11-01T18:29:57.540Z] [info] Update progress: 50% [2026-11-01T18:30:00.495Z] [info] Update progress: 60% [2026-11-01T18:30:03.451Z] [info] Update progress: 70% [2026-11-01T18:30:06.405Z] [info] Update progress: 80% [2026-11-01T18:30:09.357Z] [info] Update progress: 90% [2026-11-01T18:30:12.317Z] [info] Update progress: 100% [2026-11-01T18:30:12.459Z] [info] Bank 1 successfully updated [2026-11-01T18:30:12.459Z] [info] Rebooting to switch to bank 1 [2026-11-01T18:30:18.012Z] [info] Current firmware: v1.1.0, active bank: 1 [2026-11-01T18:30:18.264Z] [info] Bank 1 firmware build identity: 1.1.0-dev.test-only-slow-cpu-during-acquisition+b1441.g1878411 (bank 1, 21648 bytes, CRC32 0x93229D1D) [2026-11-01T18:30:18.327Z] [info] Bank 0 has target firmware: no [2026-11-01T18:30:18.327Z] [info] Starting update of inactive bank 0 [2026-11-01T18:30:18.327Z] [info] Update progress: 0% [2026-11-01T18:30:21.682Z] [info] Update progress: 10% [2026-11-01T18:30:25.143Z] [info] Update progress: 20% [2026-11-01T18:30:28.606Z] [info] Update progress: 30% [2026-11-01T18:30:32.073Z] [info] Update progress: 40% [2026-11-01T18:30:35.544Z] [info] Update progress: 50% [2026-11-01T18:30:39.010Z] [info] Update progress: 60% [2026-11-01T18:30:42.471Z] [info] Update progress: 70% [2026-11-01T18:30:45.933Z] [info] Update progress: 80% [2026-11-01T18:30:49.397Z] [info] Update progress: 90% [2026-11-01T18:30:52.870Z] [info] Update progress: 100% [2026-11-01T18:30:52.981Z] [info] Bank 0 successfully updated [2026-11-01T18:30:52.981Z] [info] Rebooting to switch to bank 0 [2026-11-01T18:30:58.532Z] [info] Current firmware: v1.1.0, active bank: 0 [2026-11-01T18:30:58.785Z] [info] Bank 0 firmware build identity: 1.1.0-dev.test-only-slow-cpu-during-acquisition+b1441.g1878411 (bank 0, 21648 bytes, CRC32 0x93229D1D) [2026-11-01T18:30:58.785Z] [info] Both banks are up-to-date [2026-11-01T18:30:58.785Z] [info] Implant update sequence completed [2026-11-01T18:30:58.785Z] [info] SUT completed successfully